Cheap Panasonic EY6432GQKW 15.6-Volt, 1/2

Cheap Panasonic EY6432GQKW 15.6-Volt, 1/2" Cordless Hyperformance Drill with 2 NiMH Batteries (Home Improvement) Price

CHEAP-PRICE.NET's Cheap Price: $199.00

Here at Cheap-price.net we have Panasonic EY6432GQKW 15.6-Volt, 1/2" Cordless Hyperformance Drill with 2 NiMH Batteries at a terrific price. The real time price may actually be cheaper- click on the 'Buy Now' above to check the realtime price of Panasonic EY6432GQKW 15.6-Volt, 1/2" Cordless Hyperformance Drill with 2 NiMH Batteries at Amazon.com.

Impressively compact, lightweight, and comfortable to use, Panasonic's 15.6-volt drill/driver fits into tight spaces where other bulkier drills won't. The 3-1/2 amp NiMH batteries deliver remarkable run time per charge, which is a big plus, especially if you need a tool for continuous use. What about power? This Panasonic packs up to 390 inch-pounds of torque--as much (if not more) than anyone needs in a cordless tool. The motor's speed control allows full torque at any speed, so you can apply full torque while still maintaining control. The tool features dual speed ranges of 65 to 450 and 200 to 1,450 rpm. The 1/2-inch chuck takes bigger bits. The first thing you notice about this tool, however, is how compact it is (the chassis measures only 8-1/2 inches) and how comfortable it feels in your hand. The soft-pad grip provides extra cushion and the tool's balance is superb, two important features if you wield a cordless day in and day out. The tool lacks an onboard bit holder, but that's about all it lacks. The 3-1/2 amp batteries are ventilated, so they last longer, delivering up to 1,200 charges and recharges. This drill is a smart buy for plumbers, electricians, carpenters, and even woodworkers--in short, anyone who wants a small, compact drill that packs a lot of torque and is built to last. The package includes a 55-minute universal charger and hard-plastic carrying case. --Jon Groebner

CATEGORY: Home Improvement

MANUFACTURER: Panasonic

FEATURES: Two 3.5 amp Ni-MH battery packs for longer run time, Delivers 390 in./lbs. of torque, 1/2-inch keyless chuck offers big-bit capacity, 55-minute charge saves time, Compact and lightweight for all-day use

TYPE: Cordless Tools, Combo Packs, (Volt), (V)

MEDIA: Tools & Hardware

MPN: EY6432GQKW

# OF MEDIA: 1

ACCESSORIES:

UPC: 037988710010

Related Products:

Customer Review of Panasonic EY6432GQKW 15.6-Volt, 1/2" Cordless Hyperformance Drill with 2 NiMH Batteries
Best Drill - but battery life question
I purchased the original 3.0 amp-hour 15.6 drill in winter 1999. The drill has always perfomed flawlessly and easliy had the best run time in comparison to 12 volt Makita's and 14.4 volt Dewalts I had used previously. I built two small boats out of white oak with this drill (all drilling and screwing) as my only drill. This included numerous 2 1/2" hole sawing through 3/4" particle board temporary framing. The drill is awesome.

My "but" comes with the battery life. Both of my batteries were shot by early 2002, with a total life of just over 2-1/2 years. There is no way I put 1,200 charge cycles into these batteries, more like 2 charges per battery per week. The run time usually last for almost a full day of boat work. That equates to approximately 260 charges. I dont know why Panasonic is advertising 1,200 charges I know my previous 14.4 Dewalt was slightly better for battery life, but the old Makita was much better. Is it the Ni-Mh battery that does not hold up over time, or maybe the batteries should always be inside, not in the varing temperatures of the garage.

With that said, I will be purchasing the new 3.5 amp-hour version. I just get irked that 2 replacement batteries cost as much as the whole new kit. Panasonic should make new batteries more affordable, because now I have two great drills and chargers, but only 2 batteries. Yup, bend over for the "lord of the landfill".

The Best Kept Secret in Cordless Drills
I've owned or used a lot of cordless drills, from Black and Decker (ugh), Porter Cable, DeWalt, Milwaulkee, Makita and others, but I'd never heard of the Panasonic until a friend who does a lot of decks introduced me to it. He was using the earlier 12 volt model, but everything I discovered in using that drill applies to this one as well.

Panasonic isn't thought of as a power tool company, but their cordless drills are the best I've ever used, bar none. They've got the fastest recharge rate- 15 minutes- and that translates to more time drilling and less time recharging. It also translates to longer battery life; the less time spent charging, the less the heat buildup, and that's what kills these batteries. I know my friend has been using his on a daily basis for over five years with the original battery. The Panasonic drills also seem to get more useful drilling out of a single charge, something that recent tests by one magazine confirm.

My current 1/2" Makita is still going strong, but if it should happen to give up the ghost, I'm replacing it with a Panasonic.

Highly Recommended
One of the top tools I have ever purchased. Runs like a sewing machine. Plently of power, it has never stalled out, and I have been using it for over one year. The chuck is excellent. The drill is light weight and easy to hold over long periods of time.

Skin Care

Plus Size Clothing

Vitamins

Contact Lenses

Massage Chairs

Gardening

Gourmet Food

Sports Apparel

Lingerie/Bras/Panties

Beauty

DVD

Home Improvement

Book

Ebook

Jewelry

Gourmet

Kitchen

Paper Catalog

Home

Lawn & Patio

Personal Computer

Apparel

Furniture

Loose Stones

Musical Instruments

Pet Products

Toy

Wireless

Automotive Parts and Accessories

Gift Certificates

Luggage

Office Product

Single Detail Page Misc

Video

Downloadable Software

Electronics

Magazine

Software

Video Games

Audible

Baby Product

Drugstore

Food and Beverage

Music

Sports

Watch